PROGRAMMING WAND QUICKSTART GUIDE (PRELIMINARY) The Programming Wand makes updating and configuring PixiePlus controllers very simple. It allows

3A) If you did not find the new drive, Windows may not have properly assigned a drive letter. This occurs if you have a mapped network drive. To fix t

4) If your configuration needs IR control, you must learn the IR codes at the PixiePlus first! Follow the IR learning instructions that came with the

6) If you’ve learned IR codes in step 4, to load up that configuration, click “Retrieve from Wand.” You will see IR codes show up under the tabs corre

that the characters are hexadecimal and is not sent. The commas are separators between bytes. Decimal: Untagged characters will be sent as decimals.

9) Unplug the USB and position the Wand close to the PixiePlus as shown below: Hit the "Write" button. The Wand and PixiePlus will sound