Sp-controls CatLinc Manual do Utilizador descarregar pdf (Página 5)

Video Output cont.’d

Connectors

CatLinc VGA

CatLinc VGA-L

CatLinc VID

CatLinc S-VID

CatLinc HD

Nominal Level

CatLinc VGA/VGA-L

CatLinc VID

CatLinc S-VID

CatLinc HD

Minimum/Maximum levels

CatLinc VGA/VGA-L

CatLinc VID/S-VID/HD

Impedance

Audio - CatLinc VID only

Connectors

Gain

Frequency response (-3dB)

Input impedance

Output impedance

THD+N @ 0dBu

Max level in

Output clip level

Output Noise

Cross-talk

Dynamic range

Signal-to-noise ratio (min)

Size

Cable Length (approx.)

CatLinc VGA/VGA-L

CatLinc VID

CatLinc S-VID

CatLinc HD

Shipping Weight

Optional Accessories

1 male HD-15, RJ-45

1 male HD-15, 1 female

HD-15 (loop), RJ-45

3 male RCA, RJ-45

0.7V p-p

1V p-p

Y: 1V p-p, C: 0.3V p-p

Y: 1V p-p, P

): 0.7V p-p,

): 0.7V p-p

0.3V to 5V p-p

0.3V to 1.5V p-p

75 ohms

2 male RCA

Unity

2Hz - 100 kHz

20 kOhms

75 Ohms

0.008%

+10.5dBu

-86dBu

-78dBu

95dB

Metal housing: 2.5"(L) x 1.15"(W) x

0.95"(H)

VGA 6"

RCA 9”

mini-DIN 9”

RCA 9”

2.0 lb.

CatLinc PS (additional power supply for

CatLinc VID/S-VID/HD)

CatLinc TERM (75 ohm male VGA

termination plug for CatLinc VGA-L)

TECHNICAL SPECIFICATIONS Cont.’d

CatLinc VGA/VGA-L

Detail Adjust

Calibrate Detail Adjustment to find the opti-

mal balance point that avoids two possible

Figure 4 - Detail Adjust

types of distortion. The images below

show display artifacts you may see if Detail

Adjustment is not set properly. For adjust-

DETAIL

ment, open any window on the source

ADJUSTMENT

Adjust 2.5mm screw

computer against a solid background.

for best picture

Adjustment is performed by turning the

CatLinc VGA/VGA-L Receiver

Detail Adjust screw with the included

2.5mm screwdriver.

Look at the lower right hand corner of any window.

If there is a lighter shadow after it,

turn the Detail Adjust clockwise.

If there is a darker streaking trailing the corner

of the window, turn the Detail Adjust counter-clockwise.

NOTE: Depending on cable length, adjustment direction may vary. Any time

the CAT5 cable length is changed the Detail Adjust will need to be recali-

brated.

No adjustment is necessary for CatLinc VID, S-VID, or HD.

For best picture, the computer should be matched to the native resolution of

the display being used. A 60 Hz refresh rate is best for any digital output

device. See your PC documentation/Help for more information.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comentários a estes Manuais

Sem comentários

Sp-controls CatLinc Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Áudio Sp-controls CatLinc